1 (edited by TurBoss 2021-07-09 22:35:01)

Topic: [bug] Unable to run .128 on a +2A +2e with DIVIDE2k20 esxdos 0.8.9

Hello,

Just upgraded a esxdos 0.8.7 to 0.8.9 on DIVIDE2K20

on 0.8.7 .128 command just leaved me on a 48k basic

when i did the upgrade the .128 command runs tries to boot
the 128 loader menu but gets stuk trying to detect logic units

I was only able to do this on a DIVIDE2K14 0.8.8 (broken now)

Thanks
EDIT:
> I was only able to do this on a DIVIDE2K14 0.8.8 (broken now)
whats broken is the interface not esxdos

2

Re: [bug] Unable to run .128 on a +2A +2e with DIVIDE2k20 esxdos 0.8.9

I have no idea yet. But if you back-downgrade your DIVIDE2K20 to 0.8.7 ... the .128 command works again?

3

Re: [bug] Unable to run .128 on a +2A +2e with DIVIDE2k20 esxdos 0.8.9

hello,


it gives me a 48k basic

> on 0.8.7 .128 command just leaved me on a 48k basic


Thanks

4

Re: [bug] Unable to run .128 on a +2A +2e with DIVIDE2k20 esxdos 0.8.9

TurBoss wrote:

hello,


it gives me a 48k basic

> on 0.8.7 .128 command just leaved me on a 48k basic


Thanks


Hi,

from here: http://board.esxdos.org/viewtopic.php?pid=1573#p1573

esxDOS v0.8.8 has been officially released. Grab it at http://www.esxdos.org/files/esxdos088.zip.
...
Changelog
...
[10/04/2020] Commands: Fixed .128 command which got broken in v0.8.7 (lordcoxis + reported by nagydani)
...

5

Re: [bug] Unable to run .128 on a +2A +2e with DIVIDE2k20 esxdos 0.8.9

hello,

Ive made 2 videos of how 0.88 and 0.89 does

0.88 = https://youtu.be/WRweGRLhPfo

Thanks

6

Re: [bug] Unable to run .128 on a +2A +2e with DIVIDE2k20 esxdos 0.8.9

and 0.89 = https://youtu.be/pyTihhaSpkM

sorry had to do a seccond post to add a seccond link

7

Re: [bug] Unable to run .128 on a +2A +2e with DIVIDE2k20 esxdos 0.8.9

I don't think is a esxdos bug anymore because pass-trough mode does the same...

Thanks

8

Re: [bug] Unable to run .128 on a +2A +2e with DIVIDE2k20 esxdos 0.8.9

TurBoss wrote:

I don't think is a esxdos bug anymore because pass-trough mode does the same...

Thanks

Hi,

thank you for the videos and this feedback. I don´t yet had time to do test on it myself.