1

Topic: Boot sequence stuck at “Detecting devices…” on +2a only

I’m using esxDOS 0.8.8 on a DivMMC Future. It fails to boot correctly when used with my +2a, but otherwise works normally with a Harelquin 128, and Toastrack 128.

When booting up on the +2a the boot screen appears (esxDOS logo, version number etc.) but after the message “Detecting devices…” appears nothing further happens.

This is a recent change so it may be a hardware problem. (I’ve replace the Z80 to hopefully rule out M1 problems but that has not helped) so I’m not sure what else to try. Do you have any suggestions?